|
Dynalco Active (Powered) - Hazardous有源磁傳感器 - 危險區域應用
Magnetic Pickups Speed Sensors磁傳感器速度霍爾效應傳感器
M920 Series ATEX和IECEx認證霍爾效應傳感器
Dynalco M920 Series Speed Hall-Effect Sensors
M920霍爾傳感器已通過ATEX和IECEx認證，可用于危險區域：Ex mb（1、2區）和Ex ia（0、1、2區）。它旨在檢測含鐵材料（齒輪齒，孔，銷等），以進行低至零速的速度測量。傳感器輸出基于TTL和Vin，并且與大多數PLC輸入卡兼容。M920具有UNF2A和M（公制）類型的多種螺紋尺寸，螺紋長度為1.875英寸至6英寸。
M920 Series ATEX和IECEx認證霍爾效應傳感器
M920 Series Zero Speed Hall-Effect Sensors
M920 系列 霍爾效應傳感器
M920 Series
描述Description
多個螺紋尺寸和長度Multiple Thread Sizes and Lengths
有效（帶電）-危險區域Active (Powered) - Hazardous Area
零速霍爾效應傳感器Zero Speed Hall-Effect Sensors
M920霍爾傳感器已通過ATEX和IECEx認證，可用于危險區域：Ex mb（1、2區）和Ex ia（0、1、2區）。它旨在檢測含鐵材料（齒輪齒，孔，銷等），以進行低至零速的速度測量。傳感器輸出基于TTL和Vin，并且與大多數PLC輸入卡兼容。M920具有UNF2A和M（公制）類型的多種螺紋尺寸，螺紋長度為1.875英寸至6英寸。
This hall-effect sensor is ATEX and IECEx approved for use in hazardous areas: Ex mb (Zone 1, 2) and Ex ia (Zone 0, 1, 2). It is designed to sense ferrous material (gear teeth, hole, pin, etc.) for speed measurement down to zero-speed. The sensor outputs are TTL and Vin-based and are compatible with most PLC input cards. M920 has multiple thread sizes of UNF2A and M (metric) type, and thread lengths from 1.875” to 6”.
300系列不銹鋼外殼完全采用危險區域等級的環氧樹脂灌封，內部沒有空氣間隙，這使其在危險區域使用時可靠，堅固且絕對安全。
The 300 series stainless steel housing is fully potted with hazardous area rated epoxy resin with no air gap inside, which makes it a reliable, robust and absolutely safe for use in hazardous areas.
Active (Powered) - Hazardous Area
Zero Speed Hall-Effect Sensors
零速霍爾效應傳感器
Dynalco成立于1968年，有三種產品，目標是為石油和天然氣行業生產工程解決方案。如今，Dynalco，因其在石油天然氣、化工、電力、海洋和建筑行業中使用的高質量儀器和控制裝置而受到認可。2011年10月，Dynalco被其姊妹公司Barksdale，Inc.收購，現在是Barksdale品牌家族的一部分。Dynalco was started in 1968 with three products and a goal of producing engineered solutions for the oil and gas industries. Today, Dynalco has become a worldwide industry leader, recognized for its high-quality instruments and controls used in the oil & gas, chemical, power, marine and construction industries. In October 2011 Dynalco was acquired by its sister company Barksdale, Inc. and is now part of Barksdale's family of brands. Back to Dynalco main product page.
|
